Ova kamera radi sa svim modelima Raspberry Pi 1, 2, 3 i 4.

Opis: Raspberry Pi Kamera Modul v2 je visokokvalitetna 8 megapiksela Sony IMX219 senzor slike namenski dizajnirana dodatna ploča za Raspberry P. Karakteriše je objektiv sa fiksnim fokusom. Daje statičku sliku rezolucije 3280 x 2464 piksela, a takodje podržava i video rezolucije  1080p30, 720p60 i 640x480p60/90. Povezuje se sa RPi preko kratkog trakastog kabla koji se priključi na jednu od malih utičnica na gornjoj površini ploče, a koristi namenski CSi interfejs dizajniran posebno za povezivanje sa kamerama. Sama ploča je mala, oko  25mm x 23mm x 9mm. Takodje je teška preko 3g, što je čini savršenom za mobilne telefone ili druge primene gde su veličina i težina bitni. Visoko kvalitetni Sony senzor ima rezoluciju od 8 megapiksela i  objektiv sa fiksnim fokusom.

Karakteristike:

• Kamera od 8 megapiksela može da pravi fotografije od 3280 x 2464 piksela

• Snimanje videa sa 1080p30, 720p60 i 640x480p90 rezolucijom

• Sav softver je podržan u najnovijoj verziji operativnog sistema Raspbian

• Aplikacije: CCTV sigurnosna kamera, detekcija pokreta, ubrzani snimak

The Raspberry Pi Camera Module v2 replaced the original Camera Module in April 2016. The v2 Camera Module has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).

The Camera Module can be used to take high-definition video, as well as stills photographs. It’s easy to use for beginners, but has plenty to offer advanced users if you’re looking to expand your knowledge. There are lots of examples online of people using it for time-lapse, slow-motion, and other video cleverness. You can also use the libraries we bundle with the camera to create effects.

You can read all the gory details about IMX219 and the Exmor R back-illuminated sensor architecture on Sony’s website, but suffice to say this is more than just a resolution upgrade: it’s a leap forward in image quality, colour fidelity, and low-light performance. It supports 1080p30, 720p60 and VGA90 video modes, as well as still capture. It attaches via a 15cm ribbon cable to the CSI port on the Raspberry Pi.

The camera works with all models of Raspberry Pi 1, 2, 3 and 4. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Picamera Python library. See the Getting Started with Picamera resource to learn how to use it.

The camera module is very popular in home security applications, and in wildlife camera traps.

* Originalni opis i slike su sa sajta Raspberry Pi fondacije.